English
Italy
Spanish
United Arab Emirates
Saudi Arabia
Oman
Qatar
ViệtNam
Malaysia
বাংলাদেশ
Indonesia
United States
Jordan
日本
한국인
中国人
KenyaTechnical Specification
- Home
- Utilities
- Technical Specification
High technology in ceramic floors and wall tiles
Select the Right Tile
Choose tiles based on their durability, water resistance, and slip resistance, ensuring they fit the specific needs of your project. Match the tile’s functional and aesthetic qualities with the intended use of the space.
Set Up the Surface
Prepare the installation surface by cleaning it thoroughly and making sure it’s dry and smooth. Remove any dirt, grease, or irregularities to ensure proper adhesion.
Spread on the Adhesive
Mix and apply the adhesive evenly over the surface, following your layout plan. This ensures a strong and consistent bond between the tiles and the surface.
Apply and Fix the Tiles
Place tiles onto the adhesive, aligning them as per your layout. Ensure proper spacing and wipe away excess adhesive from joints with a damp sponge for a clean appearance.
Design the Layout
Draft a layout plan for tile placement, marking clear guidelines on the surface. This ensures accurate tile alignment and minimizes the need for small cuts, leading to a balanced and professional finish.
Trim and Cut the Tile
Measure and cut tiles according to your layout using a tile cutter. Smooth any rough edges with a carborundum stone to ensure a clean, precise fit.
Rest and Leave the Area
Allow the installed tiles to set for at least 24 hours without disturbance. This waiting period lets the adhesive fully cure and securely bond the tiles.
Fill the Joints
After the tiles have set, apply grout to the joints and let it sit for 15 to 20 minutes. Clean off excess grout with a damp sponge and let the surface cure for up to 72 hours before heavy use.